I made a trip to Marinco and got my inlet swapped out.  So I took a couple of minutes and got it installed.

So here it is wired into the new circuit panel.  The orange lead is the 10 gauge wire from the new power inlet.  It feeds the 30 amp breaker on the left.  I also grounded the box to the trailer as well. 

And there was light!  That’s 110vac light 😉

I also purchased all new outlets that are the three prong varity.  My ground connection will be via the trailer aluminum.  But I tried to replace one real quick and as it turns out my replacement outlets are larger than the orginal so the holes will have to be enlarged slightly. 🙁

Nothing easy about vintage….

by