Here is the follow up from my water damaged wall repair. I injected wood glue into the affected areas and put some wood on place as a vice to hold the lifted veneer in place. Unfortunately, I must not have had enough pressure applied because the veneer didn’t completely flatten. They are at least solid now and should not peel.
Now it’s time to even out the stain. I used my old standby of restore a wood product. If you looked at my previous post, you may noticed that I returned the first can for this lighter golden oak color.
After 30 minutes of curing for the restore a wood, I added the beeswax feed to all the trailer cabinets. Here is the final picture.
While its not perfect, it’s better than building a new wall!
by 